The Horiba IG-340 is a high quality low cost Gloss Checker and is made in Japan to high standards, delivers a super easy to use single key operation glossmeter. View continuous measurements as you move the Horiba IG-340 along a surface or press a key to save your measurement. Save up to 99 gloss measurements and view the average at any time. Measure instantaneously from low gloss matte surfaces to the highly polished paints, coatings or waxes providing uniform production quality.
..............................................................
The combination of the near infrared ray pulse system in the Horiba IG-340 Gloss Checker and it's proprietary measuring system provide a high-precision
gloss checking system compatible with JIS international standards.
..............................................................
Up to 99 measurements can be taken with a simple key operation and
averaged using another key. Up to 99 averages can be stored on the Horiba IG-340 for later
use. Easy data management promises smooth inspection work.
IG-340
$ 1,394 USD |
||
* PayPal available for shipments to the US and Canada ONLY. Others please email for shipping cost. |
||
Reasons to buy the Horiba Gloss Checker IG-340
|
Paint and Coatings Gloss Horiba IG-340 For gloss quality control testing of |
Aeronautical & Automotive Gloss and Gloss of Structures
Use a gloss checker to determine level of cleaning or waxing condition of vehicles, and for checking finishes of touch ups. Gloss measurements for bridges, iron or steel frames, and structures or prefabricated structures, and diagnosis of deterioration of billboards, steel towers and more. |
|||||||||||||||||||||||||
Ink Glossiness and Varnish Coatings for Printed Matter
Gloss evaluation of embellishing properties in the varnishing stage in the printing Industry. Evaluation of time-induced change and uniformity of surface after drying process; checking paper surface condition. |
Checking External Appearance of Plastic Molding
Gloss meters to check the external appearance of molded resin products and for the evaluation of weather resistance. |
|||||||||||||||||||||||||
Checking Buidling & Masonry Finishes
Important when assuring uniform finish and inspection of external gloss appearance for stone, wood, concrete, aluminum sashes and other material. |
Floor Maintenance and Concrete Polishing Needs
The Horiba IG-340 and MIZA 60 are the defacto standards for Gloss inspection of waxed floor finishes in hotels, office buildings and stores. The inspection of concrete floors in stores such as Home Depot or Lowes, or other Big Box Stores. Gloss measurement for Polished Concrete contractors. |
|||||||||||||||||||||||||
Other Uses
|
Optical System |
Incident angle 60° Reception angle 60° |
Measuring Area | 12x6 mm oval |
Light Source | LED (wavelength: 880 nm) |
Detector | SPD (silicone photodiode) |
Measuring Range | 0 - 100.0 |
Display Range | 0 - 199.0 (resolution: 0.1) |
Reproducibility | ±0.5% F.S ±1 digit |
Power Source | S-006P dry battery (9VDC) for operation, CR-2025 lithium battery (3VDC) for memory |
Continued Use Time | 15 hours or more |
Ambient Conditions | 0 - 40 °C |
Dimensions | 78 (W) x 189 (H) x 58 (D) mm 3.1 (W) x 7.4 (H) x 2.3 (D) in |
Mass | Approx. 400g (with battery) |
Additonal Functions |
Automatic Calibration Automatic Power Cut-Off Display Hold Overrange Display Battery Alarm Built-in data memory (max.99) Computation of averages Keystone Confirming tone |
Warranty | One Year |
Note: Use the 20° measurement mode of the IG-331 when the gloss value in the 60° measurement mode exceeds 70 |
IG-340
$ 1,023 USD |
||
Horiba IG-340 Gloss Meter | ||
* PayPal available for shipments to the US and Canada ONLY. Others please email for shipping cost. |
||
Reasons to buy the Gloss Checker IG-340
|
Call our GLOSS EXPERTS to discuss your Application or order TODAY! 1-866-462-6832
The lowest Gloss Meter pricesin North America Guaranteed! |